Home / Technical Articles

Technical Articles

Cause                                              Correction

 
      Engine Drive Units Engaged                                 ↓ok Disengage driven units and check for loading from malfunctioning accessories.
  Crankshaft Rotation Restricted                                ↓ok Rotate the crankshaft to check for rotational resistance.

Maintenance by class as follow:
Daily maintenance (daily work)
First class technical maintenance (up to working 100h or every other month)
Second class technical maintenance ( up to working 500h or every other 6 month)
Third class technical maintenance ( up to working 1000h ~1500h or every other 1 year)

Whatever which class maintenance should be have plan and step by step for check and install, and use the tools reasonable and after disassemble parts should keep it clear, and plain anti-corrosive oil, also remember it the corresponding location for removable parts, and un-removable parts construction point, and assemble interval and adjust method.

1.What is the normal operating water temperature?

In general, the best water temperature about 95 ℃, the diesel engine is the most energy saving this condition.

  • Super Power
  1. Covering 450-890 horsepower, maximum torque 2586 N.m
  2. Dead weight 1838 kg, large power dead weight ratio!

 

  • Low oil consumption, good economy  
  1. Cummins PT fuel systems in patented technology , ultra high injection pressure, ensure good engine atomization and full burning.

Beijing Foton Cummins ISF 4.5L Euro6 Emission Standard has a compact power structure, with only 330kg weight, 30% lighter than similar four-cylinder engine, parts number reduced by 40%, more convenient for following maintenance.

Cummins B series Engine Maintenance Schedule

 

Maintenance Schedule

Daily Or Refueling

 

Every 10,000Km, 250 Hours or 3 months Every 19,000Km, 500 Hours or 6 months Every 38,000Km, 1000 Hours or 12 months Every 77,000Km, 2000Hours or 2Years

Check

Change/Replace

*Oil Level

*Coolant Level

*Fan-Inspection

*Drive Belt-Inspection

*Fuel Water Trap

*Lub Oil

*Lub Filter

*Lube Oil

*Lube Filter

*Fuel Filter

*Lube Oil

*Lube Filter

*Fuel Filter

*Lube Oil

*Lube Filter

*Fuel Filter

*Antifreeze

Adjust

Valve Lash Clearance

Check/Inspect

*Air Cleaner

*Intake system

*Charge Air Cooler

*Air Cleaner

*Intake system

*Antifreeze

*Charge Air Cooler

 

*Air Cleaner

*Intake system

*Charge Air Cooler

*Antifreeze

*Fan Hub

*Fan Bub

*Belt Tensioner

*Bearing

*Belt Tension

*Air Cleaner

*Intake system

*Charge Air Cooler

*Fan Hub

*Belt Tensioner

*Bearing

*Belt Tension

*Damper

 

Old Original Label

Scratch the coating and the 20 –digit unique anti-fake code can be found. You can test the authenticity of the product in any of the following ways:

  • Call +86 010-12365
  • Send ZJJ* plus the anti-counterfeiting code by SMS to 12114
  • Visit the parts page of Cummins website http://www.cummins.com.cn/Search/CheckOldTags?menuID=319 for check

 

New Original Label

 

  •  Scratch the coating and scan QR code through Wechat.

 

BFCEC Foton Cummins Engines ISF2.8 and ISF3.8 Engine’s Models

 

BFCEC Cummins,  knows as Foton Cummins(Beijing Foton Cummins Engine Co.,Ltd), Has been estimated in 2008 and mainly manufacture the ISF model engines 2.8 litres and 3.8 Litres for light vehicule applications and ISF 4.5 litres engines for mediun and ISG11 and ISG12 Litres engine for heavy Vehicules use.

Typical Failure Analysis of CCEC Cummins K-19 Diesel Generator Set.

 

 

1 Performance of typical failure.

1.1 the coolant does not circulate.

Dongfeng cummins countries in addition to the four electronic-controlled engine through computer control precision injection to improve fuel economy, also have some intelligent control function, so as to simplify the operation, improve efficiency, reduce the fuel consumption.The diesel engine will be more intelligent and efficient than the traditional single pump, and will be more economical in the long run.

Page 1 of 3123
  • Products Categories